Porsche 924 944 968 2x rear axle support bracket + screws

We usually don’t stock this part, it is ordered from our German supplier so please allow us up to 8-10 days to have them delivered. It can happen our supplier is out of stock in that case we will notify you immediately and send you a refund. If you have any further questions or need the part very quickly please feel free to get in touch.

These two support bearings attach the rear axle of the Porsche 924/944 and 968 to the body. In the original as a rubber-mounted connection, the torque arm of the axle is mounted with it on top behind the wheel house to the chassis. The original rubber bearings are after the decades porous, corroded and new hardly available. These rigid bearings replace the rubber-to-metal bearings 1-to-1 and provide a rigid connection between the body and the rear axle. This allows you to replace the defective bearings at a manageable cost while tuning your vehicle to be more sporty. The stiffened support reduces the pitching behavior of the vehicle. The relative movements between body and axle are prevented and the vehicle becomes tighter. The axle beams are milled from a high-quality steel alloy and galvanized. In addition to the rigid rear axle mounts, you will receive the necessary fastening materials in the required material grades. Matching these rear axle bearings of the torque arm, we also have the bearing blocks of the axle tube under the article number #1152. It is recommended to convert both bearings together into the rigid variants when overhauling the rear axle. If you have any questions, please do not hesitate to contact our customer service.

partworks is a German brand that specializes in the reproduction of young and classic car spare parts. Special emphasis is placed on high quality and good service. More than 15,000 car fans worldwide are already satisfied customers with the small company from Paderborn. As a specialist company for classic car spare parts, partworks GmbH is aware of the quality demands of its customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very closely oriented to the original or even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO certified quality management confirms the thoroughness of our work.

Reference numbers:
94433107501,   944.331.075.01,   944 331 075 01
94433107601,   944.331.076.01,   944 331 076 01
477501075A
477501076A
94433107500,   944.331.075.00,   944 331 075 00
94433107600,   944.331.076.00,   944 331 076 00