Threaded sleeve for Porsche 944 S2 968 damper leg SET
Threaded sleeve for Porsche 944 S2 968 damper leg SET
We usually don’t stock this part, it is ordered from our German supplier so please allow us up to 8-10 days to have them delivered. It can happen our supplier is out of stock in that case we will notify you immediately and send you a refund. If you have any further questions or need the part very quickly please feel free to get in touch.
Here you get threaded sleeves for the conversion of two standard shock absorber legs of the Porsche models 944 S2 and 968. They allow the use of Bilstein B6 shock absorbers.
Procedure:
1. chisel open the grouting of the old shock absorber parts and pull out shock cartridges.
2. shorten the tubes by 44.5mm
3. remove the zinc layer from the threaded sleeves in the welding area
4. carefully hammer threaded sleeves into the tubes and weld well all around (Before welding, check that the gap between the tube and threaded sleeve fits. It must be possible to tighten the damper cartridge with the nut with 5 full turns).
5. sand the weld smooth, paint and assemble the shock absorber.
In our webshop you will find a variety of other spare parts for your Porsche.
partworks is a German brand that specializes in the reproduction of young and classic car spare parts. Special emphasis is placed on high quality and good service. More than 15,000 car fans worldwide are already satisfied customers with the small company from Paderborn. As a specialist company for classic car spare parts, partworks GmbH is aware of the quality demands of its customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very closely oriented to the original or even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN-ISO certified quality management confirms the thoroughness of our work.